Map/Figures

 Getting to Know ArcGIS Pro




Building Maps with UAS Data


Volumetric Analysis


Week 12 Deliverables


Week 13 Deliverables


Week 14 Deliverables


Comments

Post a Comment

Popular posts from this blog

Installing and Using Measure Ground Control

Image
  Introduction During the transition of UAVs from a hobby to an actual profession and commercial use, there has been an apparent need for integration within the National Air Space (NAS) and how it fits within the professional world. Mission planning has become an apparent need within the different applications of UAS. Measure Ground Control (MGC) is a mission planning software that integrates flight plans, NAS map, and the ability to fly freely with DJI drones.  Methods To better explore the functionality of MGC, this lab explored the different features that it has to offer. For the flight planning aspect of Measure, the NAS map feature was explored first. Figure 1 shows the map opened and what is first seen initially.  Figure 1 shows the NAS map; the caution symbol is to inform that location of the user was within the Class D airspace of KLAF. As mentioned, the caution symbol is to inform the user that they are within a restricted airspace and that approval is needed to ...
Read more

Volumetric Analysis

Image
  Introduction Building upon the map fundamentals learned from the lab demo before, the data from the Wolf Paving Piles are used once again for volumetric analysis, but data from the Litchfield Paving Piles area was also used for volumetric analysis and for other data processing. Volumetric analysis is a form of chemical analysis which measures the volume a substance occupies, which in the context of this lab it will be used to measure the volume of the paving piles. ArcGIS Pro has a series of tools and functions that were used to complete this lab demo, which will be discussed in detail later in this post. Methods To perform volumetric analysis, the Extract by Mask tool was used on three separate paving piles. The tool essential outlines a certain section of a raster and masks it as its own raster. A polygon must be created before running this function, to define the area that is being extracted. The surface volume function is then used to directly calculate the volume of the pile...
Read more

Week 13 Deliverables

Image
  As the construction went on and the burn plot was finished, this field outing was used to create a 3D model of the construction trailers, and vehicles, while collecting data to show differences in the south burn plot. Similar to the field outing in the prior week, the flight took place at PWA over the construction, south burn plot, and the salamander tanks. The data will be used for comparison in a later field outing, similarly to the first field outing. The metadata is posted below from the flight that was performed. General LOCATION PURDUE WILDLIFE AREA dATE 041221 VEHICLE MAVIC 2 PRO SENSOR N/A BATTERY 2 fLIGHT INFORMATION FLIGHT NUMBER 1 tAKEOFF TIME 14:34 EST LANDING TIME 14:41 ALTITUDE (M) 121.92 SENSOR ANGLE 60 DEGREES ...
Read more